F100// F80

Potent power. Reassuring reliability.

The F80 and F100 are amongst the most versatile and user-friendly outboards in this power sector. In fact, in terms of their sheer power-to-value ratio, they are very hard to beat.

Yamaha's latest 4-stroke technology means both models offer unmatched performance - thanks to a 16-valve engine with Double Overhead Camshaft (DOHC) for improved acceleration, advanced intake and exhaust system designs - and Yamaha's unique multi-point EFI (Electronic Fuel Injection)

A range of convenient features - including PrimeStart™, a high-output alternator, Digital Network Gauges and Yamaha's Wide Range Power Trim & Tilt system - gives you the confidence that you're always in full control.

Technical Specifications

Engine type: 4-stroke//4-stroke
Displacement: 1,596 cm³//1,596 cm³
No. of cylinders/configuration: 4/In-line, 16-valve, DOHC//4/In-line, 16-valve, DOHC
Bore x stroke: 79.0 mm x 81.4 mm//79.0 mm x 81.4 mm
Prop shaft output at mid range: 58.8kW / 5,500 rpm//73.6kW / 5,500 rpm
Full throttle operating range: 5,000 - 6,000 rpm//5,000 - 6,000 rpm
Lubrication system: Wet sump//Wet sump
Fuel Induction System: EFI//EFI
Ignition / advance system: TCI//TCI
Starter system: Electric with Prime Start™//Electric with Prime Start™
Gear ratio: 2.27 (25/11)//2.27 (25/11)
Recommended boat transom height: L:536mm X:664mm//L:536mm X:664mm
Weight with propeller: F80BETL: 170.0 kg, F80BETX: 173.0 kg//F80BETL: 170.0 kg, F80BETX: 173.0 kg
Oil pan capacity: 3.7 litres//3.7 litres
Control: Remote Control//Remote Control
Trim & tilt method: Power Trim & Tilt//Power Trim & Tilt
Lighting Coil / Alternator: 12V - 25A with rectifier/regulator//12V - 25A with rectifier/regulator
Tilt limitter (only for remote control specs): Optional//Optional
Engine immobiliser: YCOP//YCOP
Propeller: Optional//Optional
Shallow Water Drive: Standard//Standard
Digital Network Gauge (Round/Square): Optional//Optional
Variable Trolling RPM: With DN Gauges or m-f tiller handle//With DN Gauges or m-f tiller handle
Shift Dampener System (SDS): Optional//Optional
Remark: The kW data in this sheet is based on the ICOMIA 28 standard, measured at the prop shaft